Forum Discussion

aidwilli's avatar
aidwilli
Explorer
Feb 08, 2018

1999 Lance 1130 Shower Reubild

I didn't want to rebuild my shower but the trash men, in an honest mistake, crushed it in their truck. I am mostly to blame for leaving it near the trash area on the street.

Before Beginning:


P Trap installed and area blocked in and painted in red gard:


Vinyl Liner Installed:

17 Replies

  • Trim and valve installed. Found a great all metal valve with 4" centers made by Central Brass. $45 at the plumbing supply house.


  • Cap pass. more heat than i wanted to use but I didn't feel like backstepping again. No more leaks


    Snug Fit. left corner could have been better.


  • Wire feed mig welding outdoors. Holesaw drop redrilled to make holesaw jig for centering drain hole. Worked pretty good. About 3/64" away from ideal.



    The shelf panel test fit


    Testing for leaks. There were leaks.




  • .060" 5052 Walls
    Loctite PL8x and countersunk stainless #6 screws