2003 Bigfoot Reseal
So I bought a used 2003 Bigfoot and my RV service center tells me all the roof vents and body perforations need to be resealed. Should I try to do this work myself, or, just let the shop handle it...
Forum Discussion
rexlion wrote:
I've read (on fiberglass rv forums) that window resealing usually involves removing the window, scraping off all old material, and putting them back in using butyl tape. Takes some time and patience, but not technically difficult. Avoid silicone like the plague, by the way.
Filling screw holes with epoxy sounds odd; won't the epoxy harden and made future screw removal impossible? Maybe I'm not getting the right mental picture though.
Sorry, I said the bit about the epoxy in a weird way. I meant fill holes that are stripped out with epoxy, let it cure, drill pilot hole, then screw. If the screw still fits tight and the replacement has the same diameter/pitch, I would just put it back in.
