2014 Ram back up camera
The 2014 Ram back up cameras are built in to the tailgate handle. Which doesn't help at all if you are removing the tailgate for your camper. A quick look around on the Net did not reveal an after...
Forum Discussion
Henry Wang wrote:
Just received the 6820 0274 AA wire harness and it is a different sized connector compared to what's on my 2014 3500 Ram. So it does not work. The parts guy at the dealership is stumped. Obviously the part exists, there is one on my truck but you think we can order a replacement ? Nope. Lol.
The bodybuilder document assumes a chassis cab. You may have a tailgate power lock and camera so it's a different connector. If so you need to get the tailgate harness as Bedlam suggested. At this point if you have the camera and a harness to the 6-pin?? connector you just need the first part of the tailgate harness (the second part is a jumper from the first to the camera and power tailgate lock). On my 2014 Laramie its 68224929AA from what I understand. That will get you the mating connector on the plastic plate (like the one hanging off your unused tailgate). You'll need to cut this cable and other one you bought and reassemble with the camera end from your 6820027AA cable and the chassis connector from the 68224929AA cable. Add as short of an extension as you need. Make sense?
In theory you can also buy that 10-pin?? tailgate connector from Mouser an electronics wholesaler but they had no stock when I was looking a few months ago.
