2016 CTD 2500 REAR DIFFERENTIAL QUESTION
I was looking at the window sticker from my 2016 CTD and I noticed it said I had the optional "Anti-Spin Differential Rear Axle". Ratio is 3.42. Does that mean I need to run the friction modifier in...
Forum Discussion
CharlesinGA wrote:
Correct (nominal) level is one-quarter inch below the hole, plus or minus one-quarter inch. That means a range from the bottom of the hole to a half inch below it.
Charles
Yeah, I saw that on youtube. One guy made a little L-shaped tool to put in the hole and measure the height. But I also read, "one-quarter inch below the hole, plus or minus one-quarter inch" to mean even with the hole is OK.
