A Previous Owner Removed My Lower Overloads??
Arrrggghh...Someone removed my lower overloads!:M I am afraid it is the case. Passenger side with 4000 lb payload loaded (Fleetwood Caribou 11G): After reading some Ford and Powerstroke f...
Forum Discussion
I followed the prescribed ritual of calling Torklift and having them ship me the press. It worked okay with my Dewalt drill. Took about 3-4 minutes each. It takes longer to position the drill and device than to actually do the work. The return to TL was easy, but I had to provide a new box because the one they sent was almost destroyed.
You may get some mileage out of viewing my blog which spends a little time on this. Don't want to self promote too much so PM me for the link.
I needed an assistant (the Admiral) to pry the lower leaf away from the pack, even with the jack routine. I was only able to utilize three of the four leaves but it has been a great device. I had her place the bolt and washer while I used a large crowbar and braced myself against the concrete and the truck for leverage.
You may get some mileage out of viewing my blog which spends a little time on this. Don't want to self promote too much so PM me for the link.
I needed an assistant (the Admiral) to pry the lower leaf away from the pack, even with the jack routine. I was only able to utilize three of the four leaves but it has been a great device. I had her place the bolt and washer while I used a large crowbar and braced myself against the concrete and the truck for leverage.
