Air Dams - People Always Asks Me
When other TCers see my air dam, they always ask if it does any good. I will let the pictures answer the questions. Pictures were taken after returning from a 1,250 mile trip to the Texas Truck Ca...
Forum Discussion
pjay9 wrote:
The only question I have now is how much area has been cut out to allow air passage.
My goal was to evenly space the slots using a SWAG.
The 48" x 5" has 11% of area in the slots.
The 26.5" x 5" angled areas have 8% in the slots and names.
The letters and slots are all .375 wide.
It works so I can't complain.
The mounting hole spacing was drilled to match the screws in the trim installed by Lance. There are a few extra mounting holes since I changed from the original Lance 1030.
