Arctic Fox front roof seam construction
Previously I had notices the fiberglass (after climbing up on the roof I'm wondering if it is some kind of plastic?) piece that forms the cab over and comes up to meet the rubber roof is a bit "wavey"...
Forum Discussion
I certainly wouldn't want to put ANY weight, really, no more than two or three fingers worth of pressure on that entire section. When I installed the roof vent, I made sure not to get near that seam or forward of it. Other than that, for anyone not sure about getting up on their rubber roof, it felt very solid. I'm not exactly a lightweight.
On a related note, If you're going to be up there for any length of time doing work (wink, wink, Nolan), I would bring a nice thick moving blanket to lay/sit/stand yourself and your tools on. That EPDM is rather thin.
On a related note, If you're going to be up there for any length of time doing work (wink, wink, Nolan), I would bring a nice thick moving blanket to lay/sit/stand yourself and your tools on. That EPDM is rather thin.
