Backing into drive

I would make a swoop, starting at end of DW, swooping across the street. This will make a 45 degree backin, instead of 90. Much easier IMO.

Jerry

I have the same situation...
I back down the middle of the street. This gives me room to swing the front of my truck without hitting the far curb.

It's tough...requires practice.

Start at the driveway curb to leave room for the tow vehicle to swing out then turn with the trailer. This takes practice, buy or borrow (not from the side of the road) some traffic cones and find an open area.

There are a couple of YouTube videos I would recommend. They helped me. The gate to our storage spot is very tricky to get to and then straighten out. This first one is simplified backing up.
LoLoHo Backing Up
This one is longer and dealing with several backing scenarios. The guy is a truck driving instructor, I believe.
Wandering Wagners Backup Tutorial

MFL wrote:
I would make a swoop, starting at end of DW, swooping across the street. This will make a 45 degree backin, instead of 90. Much easier IMO.

Jerry

^^^ This.

The swoop is very helpful. You can find videos showing the swoop technique. It will become second nature. RSD559's first video shows the swoop.

I am a fan of the swoop already mentioned. I use it at campgrounds a lot.

Do the swoop. I have the same situation plus a 16’ gate opening with trees further back. Take your time and allow plenty of room for the front of the truck to swing around.

I'm a swooper, too.
Pat

Thanks guys, I can get in but it has been by many attempts. I would like to look like I know what I am doing.