Bearing repack question
Hey guys, I have a double axle 26 foot camper. Today I removed cleaned and repacked the bearings (on side of my camper). I didn't put a ton of grease in and around everything, but I was caref...
Forum Discussion
Since you had the bearings out, you should have worked grease into them, filling the bearing. Then adding a slight amount to spindle, and seal lips before reassembly.
To answer your question, it may take 50 + or- slow full pumps, before you see grease coming out of front bearing, using the EZ-lube system.
Jerry
To answer your question, it may take 50 + or- slow full pumps, before you see grease coming out of front bearing, using the EZ-lube system.
Jerry
