Bigfoot 30c10.11 SL Sag & Slideout Gap
Hi All - First post here. I am the new-to-me owner of a 2003 Bigfoot 30c10.11 SL camper. When the slideout closes, it leaves a 1" gap at the top/rear of the slide, where I think water could get...
Forum Discussion
this is a very common problem with bigfoot 3000 series and the 2500 series (side wall separation caused by rear sag) series two of my earlier Bf's were sent back to the factory for repairs and I owned two others that had the repairs done . Two had metal lattice beams added to the basement and along slideout/dinette interior platform edge extending into into the bath wall and then these were bolted together.
Another had a microlam beam fitted in the basement along side the fiberglass basement and a third had its tanks modified and a 1 7/8 microlam fitted from the front to the rear of the tc along interior basement wall on the drivers side the tc
How the repair is done depends on the placement of the black & gray tanks .
Mark Holmes now works for rosmans rv contact him for more info.
Another had a microlam beam fitted in the basement along side the fiberglass basement and a third had its tanks modified and a 1 7/8 microlam fitted from the front to the rear of the tc along interior basement wall on the drivers side the tc
How the repair is done depends on the placement of the black & gray tanks .
Mark Holmes now works for rosmans rv contact him for more info.
