bigfoot owners
Just curious do you silicone around the seam where the top half and bottom half of camper meet thanks
Forum Discussion
OK, so here I have a 2012 Northern Lite. The seam where the 2 halves come together was sealed with butyl and has oozed out since it was new and now it has stopped. I cleaned off the excess off the upper portion where it had oozed out(really looked ugly without cleaning up). I was going to seal this upper side (not with silicone) but what I'm hearing is I should just leave it alone and just check my screws around the two halves and put sealant in the holes of the screws and put them back in? My vinyl insert has the screws in the ends of them to keep them from pulling apart.
I originally posted this on another thread and meant for it to be here. If I sealed the top I would not seal the bottom. You have to leave an area for water to get out if it should get in the seam. I have looked at all of my windows and compartment doors and none of them are sealed on the bottom side for the same reason I would suspect.
I originally posted this on another thread and meant for it to be here. If I sealed the top I would not seal the bottom. You have to leave an area for water to get out if it should get in the seam. I have looked at all of my windows and compartment doors and none of them are sealed on the bottom side for the same reason I would suspect.
