Brake rewiring
While taking my trailer to storage I got three messages: "Check trailer wiring" "Check trailer brake wiring" "Trailer brakes disconnected" The brakes were periodically disconnected which I...
Forum Discussion
proxim2020 wrote:
When I rewired my brakes, I ran one main + and - back to a marine grade bus bar. From there I ran a separate + and - to each one of the brakes. I didn't want to run wire back through the axles, so I ran them through some PVC conduit on the outside of the axle.
That's exactly what I did on my previous TT. I fought brake problems for a year when I first got it. Finally I did something similar to Proxim's solution and never had a problem again. I really don't like daisy chains because one problem at the front of the line can cause everything downstream to fail.
KJ
