Busted Door Hinge
I am getting my TT ready for spring so I run to Walmart in my Van to get some supplies. As I open the door in the parking lot the wind catches the door and swung it open HARD. It didn't hit anythi...
Forum Discussion
Unfortunately most door hinges today are weld on. In the old days one could just loosen 6 or 8 bolts and shim or readjust the door. Not so anymore, or at least on all of the doors I have seen.
It could be many things. You could have bent the pillar or maybe the pin or the hinge itself? Those pins are a real mutha $^*^^@ to get out. I've done a few and hate the job.
IMHO it's not going to be cheap. It might not be too bad to expensive but it's not going to be cheap to fix it correctly. Good luck.
It could be many things. You could have bent the pillar or maybe the pin or the hinge itself? Those pins are a real mutha $^*^^@ to get out. I've done a few and hate the job.
IMHO it's not going to be cheap. It might not be too bad to expensive but it's not going to be cheap to fix it correctly. Good luck.
