Travel Junky wrote:
We arrived at Monument Valley last night and cable works fine with the antenna amp turned off.
FYI -- I mentioned this at the dealer on Thursday...the service techs didn't know about the switch.
Something as simple as the antenna booster switch....then I would NOT want them working on ANY thing in my rig.
It's even listed in the instruction sheet:
OPERATION:
To receive cable signals from outdoor receptacle:
Press switch to OFF (CABLE) position. Light on wall plate will go off
showing that power is no longer connected to the antenna and that both TV sets are receiving signals from outdoor receptacle.
To receive signals from antenna:
Press switch to ON (ANT) position. Light on wall plate will come on showing that power is connected to the antenna and both TV sets are receiving signals from the antenna.
NOTE: Make sure the antenna is in the operating position (up) and pointed at the station desired.
