Caulking a large gap?? (pictures)
I'm busy removing the old caulk from my '95 Palomino Bronco 1200. There IS some rot behind this front corner - at some point, the clamp was reinforced with a heavy 90-degree metal piece bolted to the...
Forum Discussion
Find a auto body shop supplier and see what they have. What I think you are looking for and what I would ask for is something that ""fill body seams, bridge wide gaps or openings, seals fittings joints" Your measurements are within the regular Dicor stuff, but it needs to have the hole filled, not just lapped over or smoothed over but the gap filled.
I have some 3m "strip-calk" part number 051135-08578. Which works great but is a mess to work with and not pleasant to look at. But worked great on fire wall
Save you money with silicon.
Whatever you get think flexibility and water tight.
I have some 3m "strip-calk" part number 051135-08578. Which works great but is a mess to work with and not pleasant to look at. But worked great on fire wall
Save you money with silicon.
Whatever you get think flexibility and water tight.
