Caulking a large gap?? (pictures)
I'm busy removing the old caulk from my '95 Palomino Bronco 1200. There IS some rot behind this front corner - at some point, the clamp was reinforced with a heavy 90-degree metal piece bolted to the...
Forum Discussion
You might consider using the metal tape for auto body work if you can get the tape to overlap and seal to at least 1/4 inch of each surface. After applying the metal tape, I would cover it with marine 3m 5200 sealant. It will not be pretty, but it will be watertight.
Fred
Fred
