Caulking a large gap?? (pictures)
I'm busy removing the old caulk from my '95 Palomino Bronco 1200. There IS some rot behind this front corner - at some point, the clamp was reinforced with a heavy 90-degree metal piece bolted to the...
Forum Discussion
OK. Sounds like you thoroughly dried out that section. Great.
Proflex: ...this is what I used in certain areas of my major camper repairs, this summer. I liked the specs: dry adhesion to aluminum, wood and glass; elongation a break is about 1194%, tensile at peak ~500psi; tac free time ~30 minutes; cure time 4 days...
EternaBond: if you go this way, make sure you get the real thing (with a fresh use before date), and not a Chinese knock-off.
S-
Proflex: ...this is what I used in certain areas of my major camper repairs, this summer. I liked the specs: dry adhesion to aluminum, wood and glass; elongation a break is about 1194%, tensile at peak ~500psi; tac free time ~30 minutes; cure time 4 days...
EternaBond: if you go this way, make sure you get the real thing (with a fresh use before date), and not a Chinese knock-off.
S-
