Chevy Silverado 2500HD ride question
I just picked up a used 2013 3/4ton (previous TV was a 1/2 ton yukon xl denali). This is my first 3/4 ton truck and I fully expected a stiffer ride with this set up vs that of a 1/2 ton truck however...
Forum Discussion
Grit dog wrote:rhagfo wrote:
Besides Bilstien shocks, lower your rear tire pressure to about 45 to 50 psi when not towing.
^This. Or even lower. 35-40psi is more than sufficient in an unloaded pickup (depending on tire size).
This X100 before spending money on anything else. Let us know your tire size and if it is gas or diesel. Running the air pressure that is printed on the door is for a loaded truck, airing down the tires makes a huge difference.
