corrosion on the 9 pin connector
I keep getting enough corrosion on my 9 pin connector that I my blinkers and other lights won't go on. I dutifully clean the plug each time with a baking soda paste, and that fixes the problem. But th...
Forum Discussion
I got a lot of corrosion once. As it turns out, the plug/receiver were the lowest point in the line, and all water was routed towards and into them. I cleaned everything, sprayed it with WD40, and rerouted the wiring so it wouldn't channel the water into the plug. Haven't had an issue since.
Regards,
Joerg
Regards,
Joerg
