Dinette Cabinet Door for storage
I'm not sure why, but my dinette doesn't have door access to the storage. You can pull the seat cushion up to gain access, but the side storage is much better. Has anyone added a door? If so, where di...
Forum Discussion
A utility knife is certainly one way to cut light material. I tend to use power tools because I own them and know what works. When I cut sheathing and need a square opening, I'll sometimes use a straightedge attached/clamped to the work as a guide for the saw. If using a saw that might damage an inside corner, I'll stop the saw a fraction of an inch from the corner and use a fine blade saw to complete the cut. A guy can also use a router using the same procedures. I've started using my battery powered reciprocal saw more, as I become more familiar with how it performs.
Lots of ways to cut a good, square opening.
Lots of ways to cut a good, square opening.
