Does all the old butyl tape need to come off?
Getting ready to leave on vacation tomorrow and noticed the vent in the cabover was leaking. I stuck eternabond tape over the old butyl tape as I was advised it was alright, but it didn't stick proper...
Forum Discussion
Is butyl alright for a top layer on the seems? Wondering if I should remove the butyl on top and seal it with dicor leveling stuff? All trace of old stuff was removed. Then I put butyl underneath the vents, then on top to cover the seem and the screws. I went up top this morning and pressed the butyl a bit.
Plan on using a hose when we get to our final destantion on the room to try and find if it's sealed or not
.
Plan on using a hose when we get to our final destantion on the room to try and find if it's sealed or not
.
