Don't bend your flimsy steel truck bed
https://youtu.be/WyqGVRmcB2Q Good part starts at 4:00. Bad part is, this is EXACTLY how I carried my old Lance to the dealer for trade-in. I put a 2x6 crossways at the very front of the truck b...
Forum Discussion
I've seen a 70's Dodge with the bed floor sagged between every cross member, so I think some of you have selective memories. Running the supports lengthwise would have prevented this damage and running it across the width between supports would result in the same damage on almost any truck bed regardless of truck brand or bed material.
