Dually tire valve extenders that make it easy

Local truck repair center added the braided flexible air valve extenders
in 2013. Sorry I do not know the brand.
No problems.

arto_wa wrote:
Milton S976 Dual Head Chuck Service Gauge has worked pretty good for me so far, without adding extenders.

Foam knee-pad is also handy to have :W


http://www.amazon.com/Milton-S976-Chuck-Service-Gauge/dp/B000CONUJM/ref=pd_sim_auto_6?ie=UTF8&refRID=1H4AJ78P5XPJ3E73M3VF

That's what I have now! Darn right about the knee pads.

Milton S976 Dual Head Chuck Service Gauge has worked pretty good for me so far, without adding extenders.

Foam knee-pad is also handy to have :W


http://www.amazon.com/Milton-S976-Chuck-Service-Gauge/dp/B000CONUJM/ref=pd_sim_auto_6?ie=UTF8&refRID=1H4AJ78P5XPJ3E73M3VF

Thanks I sent you a PM

I just placed an order for Crossfires with extra valves that can be used to air down and also as a place to mount my TPMS.
Price for the 2 sides set up to my tire pressure spec and with hoses of the right length for my 17" tires came to $140 plus shipping.
I also got good advice - use some anti-seize on the threads, do not over tighten(finger tight +1/2 turn), watch out if you go to a tire store and let the tire guy get at them because he will over tighten and wreck them.
I can give you contact info for the very nice guy I ordered from via PM.
Joe

The addition valves half to be assembled at time of production..ie special order..
Find a local dealer to make the order.. Jeff is great to deal with but they don't sell to the public only to the wholesaler..
Got mine shipped directly but had to buy from a dealer via phone.. Took about 8 days.

Not so far.. Two trips in the sand last fall .. been to West Virginia and back Williamsburg Virginia and back and also Trenton New Jersey and back everything seems to be working fine so far

AISURFFISH
Thanks for that info .
Have you had any problems using these at the beach.

Thanks

Bob W.

I tried the chrome metal extenders from camping world and on two separate occasions found my inside duals flat...Problem is no matter how I tried them they would not hold air and deflate the tires...Threw them away and all is well again...

Thanks Aisurfish that's a big help. I sent the Crossfire folks and email and I am supposed to call Jeff there on Monday. Now I know what to discuss with him.

I may have to dismount and remount the wheels if it is necessary to have the tire valves be opposite each other to make it work. But that's OK.

I'm getting closer, and will post progress.