Dust proofing
We spend a lot of time on dirt roads, and dust infiltration has been our most serious problem. I have caulked and sealed everywhere but dust still gets in, primarily at the bottom of the (rear) entry...
Forum Discussion
kohldad wrote:
I would also want to put the filter before the fan to also help protect the fan from the dust. If the dust gets into the motor and on the blades, could be a problem and at the minimum a mess to clean back up.
Ya, thought of that... if you look at how a Fantastic is made, the motor is huge and in the way, plus the vent-crank arm is there too... There's no place to put it unless you get a vent-hood and attach it to that.
Or possibly make a simple square box that rises/sits on top of the Fantastic vent. Then ya gotta seal the bottom of it - do you drill and make it permanent? Foam tape for temporary? Blue painter's tape?
Oops, forgot to take it off the roof when I left...
My noodle's been baking trying to find the ideal solution.
