EMS Installation Question
When installing a Progressive Industries EMS-HW30C are there any negatives to completely removing the heavy shore power cable and just use romex from the plug to the input of the EMS and then wire in ...
Forum Discussion
Yes, you can run properly sized type NM cables. I would up-size cable to #8 so you can get stranded.
Make sure when you install the solid wire that stress on bends is taken care of by shaping the wire as you install it.
Care must be taken as any continual vibration can fracture solid conductors.
Make sure when you install the solid wire that stress on bends is taken care of by shaping the wire as you install it.
Care must be taken as any continual vibration can fracture solid conductors.
