Equal-i-zer head identification
I picked up what I thought was a 90001201 used from Amazon. Was right from their warehouse, but I guess it was a return item. So it showed up with no bars (good start) and the box and manual is for a ...
Forum Discussion
Well I learned something today, I didn't realize they had a hitch that large. But at any rate as you say based on the website you have a 400/4,000 lb hitch.
For grins I just measured the sockets on my 1,000/10,000 hitch and they are 1 3/8 inches (35 mm) across. If your sockets are the same size you'll have to wait for Progress mfg. But I would say if they are smaller then you definitely have the wrong hitch.
For grins I just measured the sockets on my 1,000/10,000 hitch and they are 1 3/8 inches (35 mm) across. If your sockets are the same size you'll have to wait for Progress mfg. But I would say if they are smaller then you definitely have the wrong hitch.
