Ever had TT frame failure?
Has anyone ever had a trailer frame or aluminum structure fail? Your expert opinions are always appreciated here on Open Roads. Thanks. Best Regards,
Forum Discussion
I would visit a frame shop before I made any wholesale decisions or tried any weight removal. If/when you wish to sell this RV, an air conditioner will be a plus. Besides, removing it only causes additional risk of water damage.
If you have an accurate laser, you can easily see if things are straight or bowing. I have one that has an exit point of almost exactly one inch from the case side. It is also has a magnetic strip. I can turn it on, stick it on a piece of steel up to 100', and, with a ruler, tell you if it is off 1/8" of an inch. Most frame shops have more accurate devices.
If you have an accurate laser, you can easily see if things are straight or bowing. I have one that has an exit point of almost exactly one inch from the case side. It is also has a magnetic strip. I can turn it on, stick it on a piece of steel up to 100', and, with a ruler, tell you if it is off 1/8" of an inch. Most frame shops have more accurate devices.
