EZ lube spindle and bearing repack question
My TT axles have the EZ lube spindles with the grease fitting on the end. It's time for me to repack the bearings. Is it safe to hand pump new grease through the fitting while slowly turning the whe...
Forum Discussion
Some grease gun facts:
Grease guns develop pressure in the grease, that is what causes it to move. No pressure = no grease movement. Grease guns are capable of 10,000 PSI!!! In fact the lowest one I can find develops 3500 PSI!! With a grease seal able to hold back only 10 PSI, there is an obvious mismatch. It is easy to see how a grease seal can be overpowered by a grease gun pressurizing the grease.
And on a related note, I saw ratings from 33 to 56 strokes per oz. of grease! So if a hub takes 1/2 a tube of grease (7 oz) to fill it, that could mean 231 to 392 pumps for ONE hub!!
Grease guns develop pressure in the grease, that is what causes it to move. No pressure = no grease movement. Grease guns are capable of 10,000 PSI!!! In fact the lowest one I can find develops 3500 PSI!! With a grease seal able to hold back only 10 PSI, there is an obvious mismatch. It is easy to see how a grease seal can be overpowered by a grease gun pressurizing the grease.
And on a related note, I saw ratings from 33 to 56 strokes per oz. of grease! So if a hub takes 1/2 a tube of grease (7 oz) to fill it, that could mean 231 to 392 pumps for ONE hub!!
