Fast tongue jack

I made a block out of PT 2"x 6" wood and use that under the tongue. I normally only have to lower the tongue a couple inches or so before it hits the block.
I'm guessing it's about 12"x 12"x 10.5" high.
I got tired of needing to stack wood when the jack was too far off the ground.

Wow I never thought of getting a faster tongue jack! I could save at least 45 seconds each setting up and breaking down.

Does your existing jack have a foot pad extension? If so, that and a piece of 4x6 will speed raising it.

I’m switching to a drill powered jack with a “emergency” arm powered handle option when this one gives up the ghost.