Fastgun tiedowns - tension vs camper weight
The manufacturers specify adjusting the tension so the O-ring is 1/4" below the barrel when the tension is applied. No mention of varying the loading depending on the size and weight of the camper ...
Forum Discussion
I would tend to think just the opposite- that the lighter the camper the more need for restraining
This would be true if you are trying to hold the camper in the bed against the wind. For small very light campers with large frontal areas or overhang, this would apply.
More important than weight, would be the vertical and side-to-side COGs. Lower the COG, less you need to hold it in place. I.E. think of moving a pallet of blocks vs a tall piece of furniture.
