Fender skirt questions
Hi, all. Quite a newby here. I have a Keystone Bullet TT. The fender skirts are very flimsy and have broken - I know this is big news to everyone. :) Two questions: 1. do the skirts serve any pur...
Forum Discussion
So I got my skirt replacement and it doesn't have pre drilled holes in the plastic. It is the Keystone brand skirt, so it should match perfectly. I'd like to just utilize the holes already in the trailer and not make new ones, but am wondering what is the best way to get the holes lined up. I'm going to need to pre-drill guide holes in the skirt before installing, but don't know how to insure that they'll line up with the holes in the trailer.
I'm guessing the best way might be to take the old skirt off and lay it over the new one and drill thru the holes already in the old one to the new one, but I'm not positive how well they'll line up when laying on top of each other.
Any tips or suggestions?
I'm guessing the best way might be to take the old skirt off and lay it over the new one and drill thru the holes already in the old one to the new one, but I'm not positive how well they'll line up when laying on top of each other.
Any tips or suggestions?
