Forum Discussion
Bedlam
Jul 07, 2022Moderator
Well this is how I changed out a flat on an inner dual:

To free the inside rim took a little more persuasion but no hammers were involved.

So some blocks of wood that are normally used for leveling, a couple of spare ratchet straps, 12-ton bottle jack, electric impact wrench with 22mm socket, torque wrench with extension, claw hammer to remove hub cap and some time was required to get this 9-ton truck rolling again.

To free the inside rim took a little more persuasion but no hammers were involved.

So some blocks of wood that are normally used for leveling, a couple of spare ratchet straps, 12-ton bottle jack, electric impact wrench with 22mm socket, torque wrench with extension, claw hammer to remove hub cap and some time was required to get this 9-ton truck rolling again.
About Travel Trailer Group
44,031 PostsLatest Activity: Oct 10, 2022