Forum Discussion
NRALIFR
Nov 25, 2014Explorer
Finished painting the stairs.
Two coats of spar-urethane, sanded between coats. Then masked off the treads for a single coat of non-skid.

All done. Masking tape removed!

Close-up of stair tread.
The grit/urethane mix was applied with a 3" trim roller.

A work of art :B
Even the treated posts look good!

I'm trying to engage a plumber now to bring a water and natural gas line into the garage so I can close up the ceilings.
:):)
Two coats of spar-urethane, sanded between coats. Then masked off the treads for a single coat of non-skid.

All done. Masking tape removed!

Close-up of stair tread.
The grit/urethane mix was applied with a 3" trim roller.

A work of art :B
Even the treated posts look good!

I'm trying to engage a plumber now to bring a water and natural gas line into the garage so I can close up the ceilings.
:):)
About Travel Trailer Group
44,056 PostsLatest Activity: Dec 27, 2025