SkiMore wrote:
bka0721 wrote:
SkiMore wrote:
Does anyone make something similar to a truck camper but is designed to go on a truck without the PU bed? It would sit low like a TC and wouldn't require an expensive flatbed added to the truck first. It would also let the camper use all the space taken up by the PU bed. You would have a narrow portion where the wheel wells are, but it could be 7' wide everywhere else.
Yes.
It is called a Class C RV.
A TC typically has support from the surface it rests on, so the bottom does not fall out, such as a truck bed or flat bed. By placing the TC directly (only a box frame truck would work) on the trucks frame rails, as you described would take additional engineering. I suspect this cost would exceed the cost of a used flat bed.
b
How many class C companies start with a 4x4 chassis?
I haven't any idea, I'm not looking for one. If I were looking for one, I would try a Google or Bing search. That might provide one a starting point.
b