Hand crank help
Hello! We just bought a 2007 Fleetwood saratoga highlander pop up trailer it. Has a power lift on it. But the hand crank post seems worn down when we attach the hand crank it doesn’t catch in the pos...
Forum Discussion
As above, use a hammer and small punch to push the pin through one way or the other. Grab it with some pliers (I like to use diagonal cutters for good grip) and pry it out. Take the pin to your local home improvement store and get a new split pin (aka roll pin) from the drawers in the nuts and bolts aisle. Take the pin home and check the length against the crank handle. Carefully file or grind the pin to length, leaving it a bit long if possible. Use a hammer to tap the pin into the shaft.
