Hippajac Amp Draw
Anyone know the amperage draw of the power TC Hippajac lifts? For one or for four, but specify so we know… I am wondering what amp charger controller to buy. 10 or 20? The lifts will be the bigg...
Forum Discussion
ajriding wrote:
Interesting conversation….
I should have to double check to see that I do not have them going to the battery. I think I have it all through the SunSaver Morningstar 20A controller. It is not one of those $14 ebay specials.
My batteries were only in the truck bed before, so to load I had to rely on the converter to lift it, I could not tell the difference. If the converter was weak i should hear a difference in the motors compared to batteries. No worries, the new will have a battery back in the camper.
I will hook directly to the batteries and use the charger just for solar connection.
According to their website:
"The Load connection allows the user to wire DC devices such as fans, bulbs, or communication equipment directly to the controller. This allows the controller to disconnect the loads if necessary for protection of the controller, battery, or the loads themselves. This connection is optional and, as an alternative, the system loads can be wired directly to the battery bank."
The load can't be higher than the rating of the controller.
