Hot water heater logic board help
So my hot water heater stopped working and I tracked that problem down to the logic board. I got a new one, when out to put it in and they had changed the way the wiring harness was attached to the n...
Forum Discussion
Sorry, I misunderstood. You already have the adapter, so you’re good to go.
As Old Biscuit said, plug the adapter onto the pins on the new board. Then plug the old wiring plug onto the adapter. No wires need to be removed.
It’ll look like this when it’s all connected. I had to replace mine a few years ago.
:):)
As Old Biscuit said, plug the adapter onto the pins on the new board. Then plug the old wiring plug onto the adapter. No wires need to be removed.
It’ll look like this when it’s all connected. I had to replace mine a few years ago.
:):)
