How to Greese Bearings?
I've had my trailer 3 years now and (gasp) have not yet re-greased the bearings. Is there a step by step procedure on how to do this? It looks like the center of the hubs have grease zerks. I think th...
Forum Discussion
TucsonJim wrote:
Personally, I prefer to hand pack the bearings instead of using the grease fitting. If you put too much grease in with a lube gun, you can blow out the seals.
Here is a link on how to repack trailer wheel bearings. It's not too hard to do, but a little messy.
Packing Trailer Bearings
With EZLube axles it impossible to put too much grease in, as the old grease comes out the front of the hub. That is how it works. The new grease replaces the old grease coming out.
However you can blow out the seals if you use a power grease gun or pump too hard with a hand gun.
