How Wide is a Dually? Always Need Dually Jacks?
Wondering if you can just squeeze by without the swing-outs. Are duallies all the same width no matter what brand or year? Thanks.
Forum Discussion
When I bought the TC the previous owner had it stored in his backyard on a very soft spot. One side of my truck would sink and it was quite an experience to get loaded. I don't think the previous owner had ever loaded it on his truck. Probably took 2 hours to get it on there. I store it on a gravel pad with the 5th. Not much sinking issue.
I'm right at my 4018# payload, around 3900#. If we change 5th wheels to a heavier model I will go to a dually.
Comment about a jack spacer....I have to use plywood 1" spacer in the front of my truck bed. If not I can't open the back doors of the truck, they hit the folded dually jacks. A jack spacer will aggravate that issue unless it is between the truck and jack as opposed to the folding "wing" and jack itself. If I'm visualizing the jack correctly.
I'm right at my 4018# payload, around 3900#. If we change 5th wheels to a heavier model I will go to a dually.
Comment about a jack spacer....I have to use plywood 1" spacer in the front of my truck bed. If not I can't open the back doors of the truck, they hit the folded dually jacks. A jack spacer will aggravate that issue unless it is between the truck and jack as opposed to the folding "wing" and jack itself. If I'm visualizing the jack correctly.
