SDcampowneroperator wrote:
We've straightened many of those tubes. All it takes is tripod pipe stands or good sawhorses at each end, then a couple of big guys to put their weight to it.
Sorry to hear you got caught with a forgetful moment!
I was going to say the same thing. I have helped straighten out 2 over the last few years. We used a 2x4 with a 2x4 nailed to the top and then pulled each end until more or less straightened out. You have to be slow and careful but it can be done and at no major expense. This idea will work and lesson learned.
randy
