Installed a front receiver on my F350 today
When I did a similar install on my 03 F350 many hears ago there was much cursing, modifying, prying and cracked knuckles. I'm happy to say there there was none of that this go round. I had a brea...
Forum Discussion
Torklift makes nice hardware, but costly.
I posted picture of my front mounted Honda 3000, when couple of members ask me about mount details.
Here is a sketch how I build it with material "laying around"
I only bought additional metric bolts and rubber pads, so my generator sits on rubber mounts both ways.
Metric bolts are hidden from the outside for security.
Click For Full-Size Image.
Comparing the hitches, on my 2017 model the hitch goes lower as it is mounted at the bottom of cross bar.
Click For Full-Size Image.
I posted picture of my front mounted Honda 3000, when couple of members ask me about mount details.
Here is a sketch how I build it with material "laying around"
I only bought additional metric bolts and rubber pads, so my generator sits on rubber mounts both ways.
Metric bolts are hidden from the outside for security.
Click For Full-Size Image.Comparing the hitches, on my 2017 model the hitch goes lower as it is mounted at the bottom of cross bar.
Click For Full-Size Image.
