CFBLACKTRIKE wrote:
Plannin to wire an Inverter into my Ram 3500 charging system. I already have the inverter at no cost ,, thought I oughta do somethin with it. Thinkin I can wire this 2400 watt inverter into my truck bed toolbox.
You will need some seriously large wire from the battery ! If you are really going to run that inverter close its capacity, that would be approximately 100A draw from your charging system !! I would use a 70A or 80A fuse.
Also, I hope that is a PURE SINE WAVE inverter. Refrigerator do not do well with pseudo-sine wave inverters.