is weldwood contact adhesive strong enough?
Question for those more experienced with Weldwood contact adhesive. I'm in the process of redoing the interior of the one piece fiberglass shell that makes up the snap-n-nap on my amerigo tc-11 and...
Forum Discussion
Hi Joe,
Titebond Construction adhesive is really good stuff. Sold at Parr lumber, I know. HD does not have this good of adhesive. I reinforced my sagging cabover using the Titebond product. Has held on rough roads for two years now.
7 years after glueing 2x4's to concrete a basement wall, you couldn't get them loose as they were splitting apart to get them off. It good stuff, but you need to place the pieces together right away and apply pressure. The stuff really works.
Titebond Construction adhesive is really good stuff. Sold at Parr lumber, I know. HD does not have this good of adhesive. I reinforced my sagging cabover using the Titebond product. Has held on rough roads for two years now.
7 years after glueing 2x4's to concrete a basement wall, you couldn't get them loose as they were splitting apart to get them off. It good stuff, but you need to place the pieces together right away and apply pressure. The stuff really works.
