Jack leg help - Happi jac
left rear leg on my 2000 Bigfoot TC with happi jacs will not go down. It does work if i switch the wires at the logic board controller to another location. So the wiring to the leg is good. Spiral c...
Forum Discussion
oops. wizards it is. sorry all.
Board has two fuses, both good. Parts are expensive, or i getting cheap. maybe both. We may be selling this TC and truck this winter or spring once find a class c that fits us so not wanting to spend a lot. $500 or something for main board and hand control, $250 for board alone, $150 for control. Too much. So i am trying to determine which is bad. i did read to cycle the power to the board. going to try that and call happi jac to see if they can give me any testing specs. anyone want to by a three legged camper :-)
Board has two fuses, both good. Parts are expensive, or i getting cheap. maybe both. We may be selling this TC and truck this winter or spring once find a class c that fits us so not wanting to spend a lot. $500 or something for main board and hand control, $250 for board alone, $150 for control. Too much. So i am trying to determine which is bad. i did read to cycle the power to the board. going to try that and call happi jac to see if they can give me any testing specs. anyone want to by a three legged camper :-)
