Jayco Jay Feather 25bh or Jay Flight SLX 267BHSW

You might want to join the Jayco Owners Forum and ask. You'll get good answers there. Our Jayco X20E is going on 5 years old, has the composite floor, and we haven't had any problems. There are a few folks on Jayco Owners that do have soft spots. But I also know of people that have floor rot on 3 years trailers with plywood floors. It's all about leaks and regularly inspecting the trailer. Pretty much all manufacturers put the onus on the owner to keep the unit sealed and dry.

Look at the coachmen apex 288bhs.. < 600lb TW. Only 4800 lbs.. More trailer for you $$$

Your 1500 truck will thank you


http://www.coachmenrv.com/product-details.aspx?LineID=62&ModelID=292#Main

https://www.rvtrader.com/listing/2018-Coachmen-Apex-288BHS-117374357

This one has the fiberglass cap summit package.

https://www.rvtrader.com/listing/2018-Coachmen-Apex-288BHS-5000514307

Lance also makes some nice trailers, but that may not be what the OP asked about.

I like the two year warranty on the Jayco's and they are a best seller which will help with resale price. "Everybody" has heard of Jayco.

Having said all that, I would choose a model with the plywood flooring system.

Jayco... Built in 7 hours...lol... well I guess they all are...

Im just always reading though jayco quality went down the tubes..

https://www.youtube.com/watch?v=jXMJrRQ3SVk

What is the point about the video? All mass produced items are hurry up, hurry up. Does it make Jayco inferior to other brands within their price point?

To the OP, I would still go with the plywood even if it weighs a few more pounds.

I have a 2012 Jayco Jay Flight 26BH and this camper is great. I wouldn't look at another. Jayco's build quality and customer service are second to NONE!

I would seriously consider Jay Flight over the SLX. Jay Flight has better, pretty much everything for only a few hundred more pounds.

The upgrades are very significant and the extra cost over a SLX is not. I honestly can't believe the SLX series is even selling. My dealer had them side by side, and the SLX version of the Jay Flights were such a disappointment next to the standard Jay Flights.

Back in the day, you had differing models of the Jay Flight from lux editions to stripped down editions. However none were stripped down using shelves instead of cabinets, and none changed HVAC system, or the frame like the SLX does. Be cautious if considering a SLX.

lawrosa wrote:
Jayco... Built in 7 hours...lol... well I guess they all are...

Im just always reading though jayco quality went down the tubes..

https://www.youtube.com/watch?v=jXMJrRQ3SVk

This has to be the stupidest video, well, not a stupid video, a good video that attracts all the stupid comments. I'm sure it takes most RV manufacturers 7 hours to build one, but Jayco is the only to have the balls to do this video. I just get **** tired of reading all the stupid comments. You don't have the #1 selling trailer line for 12 years if you are building ****.... if you don't have one, don't comment on quality. They are still building a great trailer .... and the Jayflight u see being built is the best bang for your buck, and most other manufacturers salivate at the thought of having the success it has

Ruger3739 wrote:
Hello all,

I'm concerned with the "foam" /non plywood floors.

As you should. Many comments over the years how these foam floors don't hold up. I consider them disposable campers.Surprised these foam floors are still used, as they are known to break down and fail after a few years of use.

There are a lot of campers with composite floors that have never had a failure. If it was a pervasive problem, you would hear about it more often. I would say that I have heard just as many concerns with soft plywood/OSB floors as with composite. And I would guess that the vast majority of both are due to water intrusion.
If you plan on keeping it a long time and do the required maintenance, this really should be of little concern.

GrandpaKip wrote:
There are a lot of campers with composite floors that have never had a failure. If it was a pervasive problem, you would hear about it more often. I would say that I have heard just as many concerns with soft plywood/OSB floors as with composite. And I would guess that the vast majority of both are due to water intrusion.
If you plan on keeping it a long time and do the required maintenance, this really should be of little concern.

The problem is you are walking on styrofoam compared to a piece of wood. Even with no water damage, the foam itself breaks down and leaves a spongy floor. If you're okay with that, fine, but many aren't and rebuild their floors using real wood.

The industry got away from it for a while using structure wood instead on the ultra lite models, like pop ups, because of the issues years ago. I guess they feel it's time for round 2 to see how long these newer laminated floors will last.