Leveling TT in Driveway
Our driveway has a slope (incline from road to garage). From where the tongue will be to the bumper, I estimate the difference to be around 2.5'. What is the best way to try and level the TT in the ...
Forum Discussion
First, get very good wheel chocks to be very certain the trailer will not roll, or even slowly creep down the driveway. Next, make a very stable pad to support the tongue jack. I would buy 6x6 timbers, cut them in 32" sections. Put two sections on the ground about 20" apart. Then place two more sections and lay them on top of the first two at a 90 degree angle to the first two, again about 20" apart. Another 6x6 section on the top for the tongue jack.
