Loosening bolts/screws
After reading another post about the AC bolts loosening up, we decided to check ours. Our AC unit was actually down about 3/4" on one side. We tightened the bolts, but it wasn't easy because the two...
Forum Discussion
GeoBoy wrote:
All the AC units have decorative trim inside that must be removed in order to access the four hold down bolts. You shouldn't have to drill holes to access the bolts.
Ditto.
I also recommend removing the bolts and putting Blue Loctite on them.
I did that after my A/C bolts loosened up the second time.
