Maiden voyage with Keystone 26BPR
This past fourth of July weekend I made my first voyage with the new camper and everything went very smooth for the most part. I have been trolling the posts and tried to get everything I needed be...
Forum Discussion
Can you cut a piece of lumber? If so notch a 12" long piece of 2 x 10 in the center of two pieces the width of the lumber (1 1/2" nominal), half the length of each piece. These notches allow the two pieces to be slid together and form an "X" in relationship to the ground. Each pair will support the weight of a TT and will greatly reduce stabilizer sway and bending.
