Making my own tiedowns How to
This is the second set of tie down I made so I thought I would snap some pictures and tell how I did it. You will need some fabrication tools. Metal chop saw, grinder, and welder were the tools I used...
Forum Discussion
MN Ben wrote:
Hi guys, I have the photos on my computer. I see I can edit my original post so I will go in there and fix it as much as possible.
I have done this on other forums using imgur but I really dont have the hang of imgur so it has been quite difficult for me. But I will see if I can get the pics up with in the week.
Ben
Just use the forum supported photo posting site I linked to above. Upload your pics to the box and copy and paste the url it creates. It also resizes the pics to 640X400 which is the forum standard and makes the thread easier to read.
