My TT - Love & Hate relationship
34ft Palomino Sabre 31qbds Love the floor plan Hate that it bounces & shakes I have used the x-chocks on both sides. I have attempted to use stablizer manual jacks on the slide out sides. ...
Forum Discussion
Huntindog wrote:Ron3rd wrote:Putting the jack under the axle will eliminate the tire flex that is contributing to the shake, but not the frame flex that the springs are still allowing.
Putting the jack under the axle is the only thing I found to greatly lessen, but not eliminate the movement.
Put the jacks under the frame just in front of the tires for the best result.
I agree. But I had an old scissor jack (maybe 25 years old) collecting dust under the workbench. Had to spray it with WD 40 to get it going again. Putting it under the axle helped a bunch, but ideally supporting under the frame is the best solution; I just don't have that many jacks!
